Motion Sensor Lights for Shipping Containers
These wireless shipping container lights are ideal for use in all types of storage containers. With an extra-strong magnet strip included on the back, these will stick and hold to your container roof, allowing for super easy and safe installation.
The motion sensor will detect any movement and turn on the light when needed allowing you to move or work inside your shipping container with added safety. These lights will also help save a small fortune versus fitted electrics. They also include a ‘3M’ sticky back strip if being used on aluminium containers (or the cupboard under the stairs!) Being very diverse these really can be used for any type of storage solution needing light.
Our shipping container lights come fitted with a 120-degree motion sensor that will be activated from 10ft/3metres away from the light. This light puts out enough light to help you safely navigate through an otherwise dark shipping container. We recommend 1 lighting unit per 10 feet of the container.
How to re-charge:
Recharged via micro USB lead in 4 – 6 hours. Using LED’s they are very efficient on power and if being used 1 – 3 times per day (for a few minutes at a time), we would expect standard battery life to last over 3-months. (please note customers’ usage of shipping containers will vary dramatically – this is only an indication of what we would expect average use to be).
With basic electrics packages for a shipping container starting at around £500.00 + VAT, if you want to light inside your container for better access and safety these lights offer good quality but very cost-effective alternative. These are also easier and very cheap for large sites to install – They require no installation other than holding them against the metal surface where you want them.
No drilling, working at heights, no putting drill holes in the roof of your container.
For re-charging, you will have to remove the light. However, a portable USB power bank can also help to re-charge your lights.
Our motion sensor lights for shipping container are very easy to set up and have 3 primary sensor modes:
- Always On Mode (providing a constant steady light as a torch) To activate turn on the light holding in the button in for 1-2 seconds.
- Motion & Light Sensor Mode (Auto switches on when detecting motion in darkness): To activate turn on the light by pressing and releasing the button for less than 1 second. The light indicator will flash green to confirm Motion & Light Sensor Mode is on
- Motion Sensor Only Mode (Auto switches on/off in darkness and bright places): To activate, when the light is already in Motion & Light Sensor Mode press and release the button for less than 1 second again. The light indicator will flash red to confirm Motion Sensor Only Mode is on.
Please don’t forget to check our other products. Click here for more options.